Questions & Answers for: Ford Explorer transmission lever

...lever hooks to other rods that move the transmission's gear shift, which in turn in the inside hooks up to another lever which pushes the valve assemly to the right position so the the fluid moves ...

...transmission you will find a cable with a nut at the end loosen the nut and move the lever on tranny until it locks into park. if it doesn't work get help from a tranny shop too complicated. and a ...

...located On the side of the transmission. Look at the lever that the shift cable pulls on. The transmission range sensor is the black assembly under that lever with the wire connector going to

...transmission manual control lever and disconnect the electrical connector for the TR sensor.Remove the manual control nut and lever.Remove the 2 retaining nuts and then remove the sensor.To reinstall ...

...transmission lever to neutral, then with firm pressure push lever forward so you feel 2 distinct notches/detents forward, the lever is now in park.  Push locking clip back into position once you ...

Transmission Range (TR) Sensor in this section.Case - Manual control lever assembly damage, manual valve inner lever pin bent, manual valve inner lever damaged, spring rod damaged- Inspect for damage.

...transmission shift lever hard to move on cold mornings? http://technoanswers.blogspot.com/2012/01/automatic-transmission-shift-lever-hard.html ------ Gear shifts hard? ...

stuck in reverse truck is off but stuck in reverse and i cant switch gears Can you disconnect the shift cable from the lever on the transmission and move the lever ?

...transmission to fix the clutch. in order to do that i need to remove the shift lever. you will have to remove the area around the shift lever inside the car to be able to get to the 4 bolts that hold ...

...lever on the side of the transmission. You will have to get under the suv to see it. The pin is tiny, when compared to the task it performs, they get old and fall off, disinigrate, etc. this is ...