Questions & Answers for: what are tone wheels Sewing Machines

Hand Wheel In the instruction manual it explains how to draw up the bobbin thread on page 10. It says to turn the hand wheel slowly towards me until the needle goes down then comes up again. My needle

warning tone? When I turn on my machine the stitch selector light flashes at 88, all the stitch selector lights flash on and off, and the machine emits a high pitched beep. What's going on and how do ...

singer sewing machine - hand wheel On my singer the hand wheel has a smaller wheel inside the larger hand wheel that you push/pivet to release the hand wheel so you can use the bobbin winder, which I ...

needle centering wheel is stuck tight and cannot On my Elna Super 62C, the needle centering wheel is stuck tight and cannot be moved by hand. When I take the top cover off I can move the wheel with a ...

My wife's mother had an old New Home Sewing machine. Instead of a belt drive off the motor this machine has a slip on rubber wheel about an inch in diameter that is spring loaded and presses against ...

I have an Elnita 250 there is a problem with the wheel, when turning it it does not operate the needle up and down? Make sure the stop motion wheel is tight, if it will not tighten you will need to ...

I removed the hand wheel cover on my Bernina 1001 because the wheel was too tight and now I cant get it to do anything...sew, wind bobbin. Help With the wheel on you will have a 3 pronged washer, make

how do you thread the bobbin First chose the colour tone to tone or fabric colour thread new thread. Then take a bobbin left hand some 3 or 5 wring bobbin thread for right hand wring opposite side ...

...you should choose correct case size selected one bobbin. Then you should choose the fabric colour tone to tone or contrast colour cotton thread .And then finally you should Please see the link ...

fully charged, but no dial tone or incoming calls KXTGA 402 Maybe 'cuz its a sewing machine