Questions & Answers for: throttle control lever

...throttle control lever cable snapped on my 1994 honda accord is that the cause of my transmission problems? If it is an auto trans. then the answer is yes. throttle control lever syncronize with the ...

...throttle control cables removed from throttle lever. The cruise control cable and throttle control cable from the throttle body lever. The fuel pressure regulator vacuum hose, positive crankcase ...

...throttle pot. Move the speed pot while pushing the lever forward. If it works could be the speed pot has a dead spot on it. Also check wires loose and a mechanical issue with the throttle pot and the ...

...throttle control spring on Honda GVARA lawnmower engine I bought a replacement throttle return spring, part # 16562-z-0-000 for Honda lawnmower engine GVARA. There is no diagram in the repair manual ...

...trip throttle control lever may have been depressed while inserting key so release control lever completely 7 beeps=throttle trip throttle potentiometer fault or speed potentiometer ...

...throttle potentiometer to control the speed of the scooter. The lever has to be in the middle or neutral position when the scooter is turned on, if not, you will get a 7 flash code. If the throttle ...

...THROTTLE CONTROL ON MY PRIDE V10 SCOOTER AND RIDING IN GRASS IT STOPS AND BEEP 6 TIMES 6 beeps = Throttle lever (pot) is not in center position. Return throttle lever to center position, then turn ...

control the throttle that it connects to if by lowering the rpms with the throttle lever and the governor lever moves forward , the governor will be ok the problem will be a missing spring/rod for the

Throttle control lever won't Stay put When you push the throttle control lever forward to go faster, it jumps back to the idle position and stay's there tighten up the screw that is the throttle lever

...throttle control . Has 2 position sensors in the gas pedal assembly an 2 position sensors in the throttle body ,plus a DC motor that controls the idle . The sensors are inputs to the engine computer ...