...battery and contact wires from a voltmeter. These have fine tips. First, attach ground to ground, and then use the positive cable to check the connections in the plug so that the lights come on. then ...
where is the starter relay switch Go to your battery and follow the positive battery cable to the start solenoid/starter relay switch. It is usually placed under a side cover right next to the battery
battery in without disturbing the nuts. Then the screws will go into the nuts for tightening. Always loosen the negative cable first and replace it last to minimize the chance of shorting the positive
...is the positive cable. You can connect the black ground wire (negative) anywhere on the engine /transmission to any bare metal (unpainted and unvarnished). The shifter or brake peddle work just
Question about 1998 LS 650 Savage
...1998 suzuki savage 650 my son and i bilt this bike, after the build the runs great but it is not charging! i dont thik we got the wires right for it to charge the battery. just need to know what wire ...
what size is the drive belt http://www.bikebandit.com/1998-suzuki-savage-650-ls650p/o/m147778#sch245249
cable adjustment DOWNLOAD Suzuki LS650 Savage Service Repair Manual ... ? 1:07 www.youtube.com/watch?v=HkK3fZYhPLY Mar 18, 2015 - Uploaded by Catrina Smite how to adjust the carburetor on suzuki ls650
Question about 1998 LS 650 Savage
...battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary. 4. Bank ...
...battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter. 5. Bank angle sensor ...
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions