...strap wrench, grasp the outer diameter of the A/C compressor clutch hub that houses the rubber donut. While facing the compressor, try to rotate the hub clockwise, then counterclockwise. If the hub ...
strap wrench can be placed around the clutch plate to aid in bolt removal. (9) Tap the clutch plate lightly with a plastic hammer and remove the clutch plate and shim(s) from the compressor shaft (Fig
...of sort, on the top side of the tank. With care using a strap wrench you can loosen this retainer and then carefully remove the fuel pump with the sending unit. I hope this may have assited you. ...
...strap bolts with a socket wrench. Remove the fuel line and electrical harness for the fuel pump. Step 4 Lower the fuel tank so that you can remove the lock ring for the fuel pump. This will allow you ...
...You can but its not necessary. If you choose to do so you will need a strap wrench to hold the pulley so you can unbolt it. You can also try to unbolt it with the belt on but usually it will
Usually answered in minutes!
759 Questions
706 Questions
609 Questions
602 Questions
526 Questions
