brake inspection and have them check for posible loose calipers I have experienced problems with my Passat, when working on the brakes it is very easy to hit the sensors, these are a push fit, if they
...make a squealing/rattling noise from the rear. When I depress the brake pedal the noise stops. BRAKES ARE RATTLING IN DISC BRAKE CALIPER, TRY NEW SET OF PADS WITH FIXING KIT/TENSION ...
tire removed,inner brake pad can be wiggled with fingers There are spring clips which keep the pads tight in the caliper. These spring clips are missing, or are broken, or have lost their tension, etc
...you have what is called a brake pad walking. How to fix this is to replace the brake pad hardware so that the brake pads will be more secure .It should not be a safety issue but i know its annoying
Question about 1993 FXR Super Glide
stop rear rattling Aftermarket brake systems are your only choice as far as I know. Maybe PMC or some other outfit makes them for your bike. You may even have to replace the rotors as well. Now, there
...brake pads rattle on a 2001 GMC Sierra 1500HD I have a 2001 GMC Sierra 1500HD. The front brake pads started to rattle on both sides so I replaced them. The rattling stopped for about a month and now ...
brake pads rattle. i replaced the rear brake pads to get them to stop their constant rattling, but that didnt cure the problem. if you hit it in the back you might wanna hit the front too
Question about 2002 Corolla
...pad allowing it to dry then reinstall as per std, this will stop the squeak, or replace anti rattles, silicon is cheaper will last the life of pad, but all new pads will have to be treated the in the ...
brake pads were changed. All pad keepers were good and tight as well. A loose pad could do it. Check the pad anti-rattle clips again. The pads should be snug in the calipers. Its possible the new pads
Question about 2002 Corolla
...stop (of course foot on brake pedal) brakes squeak at low speed moderate pressure has ceramic pads noise from: anti rattle shims missing Pads worn and low pad warning shim is working master cylinder ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions