...reset to factory standard. I also had the air induction serviced and cleaned. Problem still persist. Any suggestions would be appreciated. It sound like your idle air control valve is sticking and ...
...standard odometer and the maintenance light is now reset. holding trip in doesnt work key on push and hold odomitor and turn off while still holding button in then turn key on while still holding ...
...misperformance. The fule pump must be calibrated at an authorised centre to confirm the parameters/standards or be
...reset it and see if it comes back on? You only need worry about the CEL (Check Engine Lamp) if you live in an area that has Enhanced Emissions Testing (like California). I would guess that the code ...
I had new tires put on standard size for the car done every thing the books says to reset it and it just wont reset what wont reset?
Question about 1998 Camry
standard on the XLE, & an available option on the LE. When the battery cable came off the immobilizer lost it's memory & is not reckoning the chip in the key. Try locking and closing
...reset Scs warning light toyota corolla verso 02 Child rear seat set factory fitted (different seat belts to standard) take this car to your dealership you may be missing the required sensors.they can ...
Question about 2010 Corolla 2.0
...reset switch, the tire pressure warning ECU can be set to issue a warning at an inflation pressure that corresponds to the standard pressure of tires .Therefore, you must set the warning threshold to ...
reset maintenance light pretty standard hold trip A in with engine and key off while holding trip button in turn key and engine on. keep holding trip button in until light stops flashing when it stops
...Standard Motor Products presents: Technician's Toolbox "2000Toyota Corolla, P0171 & P0420 codes" Smoke testing for codes P0171 P0174 - YouTube ? 5:48 https://www.youtube.com/watch?v=kZsqEfP-5zM ...
Usually answered in minutes!
1,828 Questions
1,753 Questions
1,565 Questions
1,303 Questions
1,231 Questions