Questions & Answers for: Saturn slave

i cant get pressure to my clutch pedal in my 1995 saturn sc2. i changed out the slave cylinder and the clutch. I tried bleeding the slave cylinder, and still no pressure, why? You cannot bleed these ...

How to bleed the clutch on a saturn 97 one way to bleed it is by pulling the piston like slave cylinder with the rod out of the transmission and by pushing the rod into the slave cylinder several ...

where is bleed screw on master slave cylinder I guess if you could decide which you are talking about, the master or the slave, it could be answered. masters do not have bleed screws, slaves do. slave

Where is the 1999 Saturn SL2 slave cylinder located? on a manual transmission the Clutch Slave Cylinder is located on the drivers side front of the transmission. You can locate it by first finding the

repeated leaking with new slave cylinders on saturn vue 2007 Vehicle had a leaking slave cylinder-was replaced by a shop with aftermarket parts + leaked again- they returned parts as defective-used ...

unhooking hydrolic line from outer slave cylinder connection if the hose is screwed directly into the slave cylinder you will have to loosen the hose first and then remove the slave cylinder to turn ...

how to pull slave clutch cylinder Remove the transaxle. Remove the hydraulic line from the slave cylinder. Remove the hydraulic line from the slave cylinder. do you have the 2.2 4 cyl or do you have a

How do I fill the slave unit of a hydraulic clutch 04 saturn Fill the master, and bleed the slave, just like you bleed a brake system. Takes two people, and three are better. Pump clutch. Hold ...

2005 saturn vue slave fluid check how do I check to ensure that I have enough fluid in the slave? I would first need to know what a slave is to let you know how to check the fluid. If you are talking ...

Where is the slave cylinder on a 5 speed saturn vue 04 2.2 front wheel drive Hi Nicolas,here's a repair guide from Autozone on replacing your Clutch slave cylinder,join their site and become a member ...