Questions & Answers for: Fujitsu slave

How to set a Fugitsu HD as slave. I have a Fugitsu model: MPA3035AT cl ID: YTIN 3.2 GB HD that I want to install into a IBM Lenovo desktop as a second drive. And I need to know which pins to jump to ...

the latest antivirus updates and scan for viruses or else try scaning this hard disk as a secondary slave hard disk with some other computer

CD drive runs but the computer does not read it. Does not show up as an installed drive in my computer didu check if it on slave or master?cause sometimes thats the problem.....

...a 2nd device connected to the same IDE cable, verify one is set to MASTER and the other is set to SLAVE. Cable Select (CS) setting can fail - placing both devices as MASTER/SLAVE will eliminate a ...

Laptop 2nd HDD(Slave) running max 20mb/s I install hdd on slave drive located at the CDrom slot coz i hv a malfunction Master IDE. Y does the hdd run max around 20mb/s?? Why not install a new 2.5" hdd

I am adding a slave hard drive do I need to add I am adding a slave hard drive. Do I need to add a jumper to my existing master fujita model mpf3102at hard drive at the slave present position. I would

how do I set a fujitsu man3184mp hard drive to be a slave set the jumper slave then the other set to the master so can detect as the slave

how to set hd fujitsu MHZ2250BJ as slave ? Press and hold that key during the boot up process to enter BIOS the scroll down to advanced bios features press enter change your first boot device to IDE-1

...The options listed for 1st,2nd ,3rd Boot device include:IDE-0 means Pri master ?IDE-1 means Pri slave ?IDE-2 means Sec master ?IDE-3 means Sec slave ?hope this ...

jumper location is usually printed on the top of a hard driveIDE-0 means Pri master IDE-1 means Pri slave IDE-2 means Sec master IDE-3 means Sec slave  single or master :::::master with slave ::|