Questions & Answers for: Samsung SGH sim card

SIM card and not with the phone. You have only two ways to get rid of the PUK code. Either you replace the SIM card , or you call phone provider that issued the sim cadr (eg. At&T, Virgin, Tmobile

...sim card related / spesific, if you take the sim card out from the phone, the phone will work with another sim card. The puk comes up when the pin code has been entered wrong 3 times. To get the puk ...

...SIM card documentation. Calling the SIM card company and getting PUK free of charge. Replacing the SIM card. The PUK is linked to SIM card not to phone. To unlock you can look for SIM card phone ...

...sim card when it's already installed Here's what you need to do: 1. Remove the SIM card and wipe the gold metal on the SIM with a clean cloth. 2. Re-insert the SIM card. If the phone still ask to ...

...sim card with sim card already inserted First, make sure you have the SIM inserted in the phone correctly. If you do - and the phone still doesn't recognize the SIM card - you may need to replace the ...

...sim card and not the phone, so the message your being told is that this sim card is now blocked this happens if the wrong PUK code has been entered more than 10 times. All you need to do is get a new ...

...sim card Hello, All you have to do is to remove sim card and use another phone to confirm if the sim card is bad or not , if the sim card works on the other phone, then your sim tray that is the one ...

sim card is working in other h.s or not. 2.Make sure the sim slot is o.k. only try these two. 3.If all the above steps fails, check the SIM card connector pins for damage. if so try to get serviced. 4

...sim card provider), they will tell your the code. There's no other way or no means to get the code except from the Service Operator. They might ask your few questions related to the Sim Card, like ...

...sim card it start searching and hung up yes First All Check:1.Confirm whether same sim card is working in other h.s or not.2.Make sure the sim slot is o.k. only try these two.3.If all the above steps ...