...Sensor (VSS) On vehicles equipped with 4-wheel anti-lock brake systems (4WABS), the vehicle speed signal is generated by the rear anti-lock brake sensor and sent to the 4WABS module. The 4WABS ...
Question about 1998 Escort
...not that then it could be a short in the system 98 ford pick up truck iam havig problem with my signal lights and flashers evry time it go on.I dont know if its the flasher itself or it got a
Question about 1995 F150 Styleside Regular Cab
...system on could result in deployment of the air bag and possible personal injury. Disconnect the negative battery cable, and remove the steering wheel. Remove the bumper and the carrier snapring ...
...system (4WABS) module. The instrument cluster micro-processor monitors the VSS data from the 4WABS module and commands the speedometer with a corresponding movement of the pointer. The vehicle speed ...
...signal for the CCD system is same as in the push start except that the falling edge is now generated to control the time at which the coil is turned ON. The coil ON time, or dwell, for this system is ...
the only thing in the system is the turn signal flasher not working for the left side.the signal flasher looks the same as the hazards but is a different flasher located in the same area as the hazard
Question about 2005 F 350 Super Duty
...signal shaft, multifunction switch has all the contacts for the lights, wipers, and turn signals. Sometimes the contact points get out of alignment and the alignment is sometimes corrected by ...
...system (4WABS) module. The 4WABS module sends the vehicle speed signal via circuit 679 (GY/BK) to all systems which require a vehicle speed signal input. Speedometer The electronic speedometer ...
Question about 1999 Explorer
...system click on body & accessories then under subsystem click on power windows . Click the search button then the blue link. Look at the wire colors so when you take the door panel off you know ...
Question about 1999 Explorer
system concern is detected, the PCM sends the instrument cluster a command signal to illuminate the wrench warning indicator. If the 4WD control module detects a failure with the 4WD drive system, the
Usually answered in minutes!
3,749 Questions
2,998 Questions
2,612 Questions
2,348 Questions
2,636 Questions
