Questions & Answers for: side turn signals flash stays

flash alternately 3) when I signal a right turn and then press the brake the brake lights go off completely. The turn signal blinks feebly. 4) and strangely enough when I am in cruise control and turn

Ad

...backup light switch, which is screwed into the side of the transmission has to bad. If you have trouble finding signal flasher, turn your right side blinker on, and follow clicking noise to

Ad

...side will flash. If all the fuses are good, you have a bad turn signal switch. This requires a special tool (available at most parts stores or from the local Snap On man) to access the switch AFTER ...

Question about 2007 Uplander LS Minivan

1 Answer

turn signal with the size in book however it stays let does not blink Does only one side do it or both. If signals on both sides fail to flash but stay on steady, then it is probably the flasher unit.

...turn signals stopped working, I assume maybe a blown fuse. I looked for that fuse under hood but its not there. I looked at the fuse panel under the driver side dash but the fuse box cover is gone, ...

Question about 1996 Accord

1 Answer

...turn signal the light does not flash. only the drivers side is like that the other side works just fine. and i have already changed all the bulbs. see i rewired it, and my dad said that there is a ...

...brake light switch as it shares the common wire. The split between the left turn and right turn signal wire has to occur, yet the opposite brake light will stay on steady while the other side

Question about 1992 Jetta

1 Answer

you have one light stay on all the time.most time turn signal switch bad.if you have a blown bulb on one side. the other good signal light bulb on that side will flash quickly.need to replace the bulb

side does not work you could have a faulty turn signal switch or module check for continuity. For more information about your issue and valuable "FREE" downloads that you will need please click on the

...turn signals work ok. But, no instrument cluster lights. Then everything goes normal when it warms up. This is usually due to a connector terminal that is loose in the connector. It might even be the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...