Questions & Answers for: shoulder bolt

...rear seat back shoulder seatbelt guide from belt I strpped the retainer bolt head on rear seatback shoulder seatbelt guide. How do I remove seat belt from the guide? drill it and use an easy ...

...shoulder on the bolt. If you continue to torque down the suspected bolts, you will snap the bolt off ( don't ask me how I know this ). You can either 1.)replace the old gasket with a new one or 2.) ...

how to change a belt on a model 420 snowblower i cant get the belt past the shoulder bolts and on to the pulley the belt is for the blower Loosen the shoulder bolts so that the belt will go past them.

shoulder (bolt shoulder) and a cam follower (plastic sheath) down there on an arm assembly, the bolt and sheath on mine worn down so one side was flat,.... it got caught where it was supposed to slide

...shoulder bolt part #27821? Where can I purchase a shoulder bolt part #27821 in the Rochester NY area? Boltdepot.com is a fantastic site for selecting bolts & screws. You won't find it by part ...

...shoulder cushions (12 mm bolt at the bottom of each cushion) a. Remove seat belt from shoulder cushion guide at the top of the cushion b. Lift up and forward on shoulder cushions to remove them (if ...

...shoulder-bolt is tight. Any idea why the tire is pulling off. 1. Replaced the arm-pivot because the thread is loose. 2. Replaced the bolt-shoulder, plastic cover and front left tire. The front left ...

...shoulder bolt on oil filler tube and rotate tube. Now remove 4 1/4" bolts holding on engine housing cover. The bolt holding the gas tank can be loosened and the tank rolled out of the way. Look for ...

...Shoulder bolt snap off my MTD riding mower deck? I am having a problem with my model 13AX605H730. Now, the last 2 times I have attempted to mow with it, a shoulder bolt snaps off. It's the same bolt, ...

Can't tighten but to keep blade in place bolt keeps turning so if the bolt isn't strip, then look for a clearance problem where the blade fit the shoulder to the end of the shaft Change the bolt