Questions & Answers for: shock mounting

Question about 2004 Neon

1 Answer

...shock mounting nuts. Remove plastic cover from the top of the shock assembly. Remove 2 nuts attaching the shock assembly upper mount/spring seat to the shock tower. Raise vehicle on jackstands or ...

Ad

...shock upper mounting nuts. Cover, the two nuts, and the reinforcement from the top of the shock Shock from the vehicle Fig. Remove the cover to gain access to the upper shock absorber mounting ...

Ad

Question about 2001 V 92 C Deluxe

2 Answers

...shock mounts and move the lower mount back on the swing arm lowering bike about an inch .a better way is to seek out shorter shocks,measure distance from mounting bolt centers & look for shocks ...

the rear shocks poped through the shock tower on my 2001 sebring. What needs to be replaced? It sounds like what you described, the shock tower mounts needs to be replaced. I believe you can buy that ...

...shock mounting nuts. Remove plastic cover from the top of the shock assembly. Remove 2 nuts attaching the shock assembly upper mount/spring seat to the shock tower. Raise vehicle on jackstands or ...

Question about 2007 Yukon Denali

1 Answer

how to change shocks on a 2001 Yukon Denali shocks??theres a bolt on top and on bottom of the strut called the shock mount bolt remove theme and the shock will come right out.to put new ones mount the

Question about 2007 Yukon Denali

1 Answer

BROKEN DRIVERS SIDE SHOCK MOUNT BROKEN DRIVERS SIDE SHOCK MOUNT what does ford actually refer to it as ? mount or housing? the factory riveted to the frame part that holds the upperpart of the spring ...

Question about 1999 DeVille

1 Answer

shock absorber mounting Negative battery cable Shock absorber electrical connector from the rear suspension support, If equipped Support the lower control arm with a jack to relieve the tension on the

replacing front struts, how do u do it? heres what you do rent a shock compressor from autozone compress shock take off bolt on top of shock watch fingers toes it will shoot down very very very very ...

Question about 1987 Mighty Max

1 Answer

...shock absorber mounting bolts should be tightened only to 7-10 ft. lbs. (9-14 Nm). Fig. 1: Install the shock absorber so that the white mark faces toward the outside of the vehicle - 4WD vehicles, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...