Questions & Answers for: set cam and timing chain

...cam marks at 90 degrees and set main timing chain on marks, it makes cam timing off? can someone please help? google Dodge 2.7 timing chain............select images........... the 2nd and 3rd images ...

Ad

...set the timing chain marks on a 2005 kawasaki KX250F Timing chain marks??? Or marks on your cams?? On the cams you should have 2 marks on each side of your cam sprocket. They should be even with the ...

Ad

cam and crank gear and timing cover gasket set about $475.00, less $65.00 if going to used same gear's. on an 2.4L engine both cam gear's, crank gear, timing chain and balance shaft chain, gasket set

set the cam timing on a dodge 2.7 liter, between the exhaust cam and intake cam???? HELP!! Here are the diagrams for the secondary timing chains (exhaust cam - intake cam) and the primary timing chain

...engine. DO NOT be tempted to just put in a new chain, replace the chain and cam gear as a set, wear on the cam gear will cause the chain to be slack, which in turn causes the cam timing to be

Question about 1992 C1500

1 Answer

...set the cam in the head, carefully place the timing chain around the cam gear, trying not to move the cam. Once you have the chain on, push the cam down in its slots in the head and look ate the ...

...set timeing cam and single chain on 2.4 toyota engine need to know where to set cam gears and timeing chain There are marks to line up front pulley on TDC on timing cover and the cam gear up

Question about 1992 C1500

1 Answer

...finding the single dot on the chain.Set the mark on the cam gear at very top and put the chain mark on that mark on the cam gear.Stick the cam gear back on the cam and bolt it back on.Your set

...with the chain, the crank should have been set to TDC on number cylinder 1 and there may have been marks on the cam gear and the head to show where it should be set when the chain is

Question about 1992 C1500

2 Answers

...Set the piston at top dead center (TDC), position the cam so that both valves are closed then assemble. That engine is based on a Honda engine. The Honda has an overhead cam that is driven by a cam ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...