Questions & Answers for: replace post rotor

...replace the rotor? lot of time there a hole in the rotor that for the ajustment unscrew the ajustment if you dont have a hole hammer big one there a ridge inside no miracle there big fu????? hammer ...

by now. Hopefully if someone else has this problem, they'll find this post and save themselves some headaches. Moral of the story: replace one rotor, have the other three turned or replaced as well. :

...day. I found an oxidized distributer. I sanded the posts and it ran fine for about a month. I then replaced the distributer with a high quality gold plated cap and rotor. I ran fine for another

...Use a stiff thin wire and clean it. Hopefully the rotor is intact. Replace everything and you should be all right. Post me a message if the rotor assembly appears cracked. Then you need a new

...faulty or the rotor cavity has some obstructions. You will have to remove the rotor and clean the cavity or replace the rotor. Please rate the solution if you find it helpful otherwise post a

...spinning so washing is incomplete Hi If the rotor is not spinning then the issue is with the motor or rotor that should be replaced. Hope this helps...please post back for further assistance. ...

BOSCH DEMOLITION HAMMER GSH11-E REPAIR MANUAL The bearing of rotor is wornout need to replace. Can this be replaced or need to replace the whole rotor assembly?? See posted solution.

...lower bolt hole will not go over the lower bolt post without force. Now it drags and heats up the rotor. did you turn the rotors some times there ia ridge on the rotors that needs to be machined

...post some pics? The screws on the rotor are there to hold things together while the vehicle is assembled. If there are bolts/screws holding the rotor to the hub they do not need to be reinstalled. ...

Replace rotors second time under warranty car pulsates and shakes at high speed when applying brakes any good answers. Thanks Read this post on what causes brake pedal pulsation. Hint: It's not the ...