intake manifold just under valve cover how do i fix this most likely the intake manifold gasket will need replacement. but find out exactly where the leak is first. The intake manifold gasket needs to
...replace an intake manifold gasket on a 1996 gmc jimmy Hello, Here is a detailed summary on the procedure of how to replace the intake manifold gasket on a 1996 gmc jimmy; REMOVING THE UPPER INTAKE ...
...valve is in the valve cover. The valve cover needs to be replaced in order to replace the pcv valve. The intake must be removed in order to remove and replace the valve cover containing the pcv
REPLACE PCV VALVE ON 2007 ACADIA There is a black tube that connects to the intake tube that is part of the PCV system. There is no PCV valve like on older vehicles. Be carefull when removing the tube
trouble code p2070 Intake tuning valve sticking- should replace it though it is most likely just has carbon build up on it- you could try cleaning it first though
IMT valve location on 2008 GMC Acadia Where is the intake manifold tuning valve located on this vehicle on top of intake manafold
...thermostat housing, screwed into the intake manifold. Should be two sensors, one having only one wire feeds dash light, one with two wires feeds computer to adjust fuel mix depending on engine
Question about 2008 Acadia
2009 GMC Acadia SLT 3.6 need intake manifold torque specs and sequence OK now that you have your engine right does this look right. The numbers are small but they are there. please rate my help.
What is the the torque sequence for intake manifold? Always start in the center and spiral out is always accepted and works just fine
...valve is in a difficult location which I made clear to a friend who was helping to remove it, to not break it off. Only this pcv was broken off close to the intake and having difficulty removing. Any ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions