headlight. and see if they come on one by one. this is without a doubt the BCM. it is your fuse block and accessory brain box. this is way too common in chrysler products. have him remove the bcm/fuse
...replace a headlamp? Follow these steps to change the headlight bulb on your vehicle: Open the engine compartment hood. Locate the back of the headlight to determine the lamp and bulb type. Decide ...
Question about 2012 200 LX Sedan 2.4L 4-cyl. 4-speed Automatic
...replace a right turn signal light in a 2012 chrysler 200 Open the hood and reach behind the headlight cluster. Turn the signal holder counter clockwise to remove it. Pull the bulb out (think they are ...
...headlight bulb on 2011 chysler 200. Open the hood. Look at the back of the head light assembly. You will have one of two set ups. At the back the assembly will have either two bolts at the top the ...
Low beam headlight illumination Very poor headlight illumination with low beams I would first replace the bulbs and have them adjusted.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
