...brake switch is bad. check that the earth wire is secured tightly at the light cluster, if needed, remove the wire, and clean with grit paper, then replace.......it may just be a bad earthing ...
light still come on do i need to have it reset 2000 avalon same issue after replacing master cylinder and 2 rear calipers vsc lights stayed on. Benched bleed master cylinder and bleed all brakes still
...brake lights are not working. I replaced the bulbs already. Could it be the socket that holds the bulb? what about the courtesy lights fuse? or maybe your blinker switch? you might have a broken wire ...
Question about 2001 Highlander
...brake lights are not working on my 2001 Toyota Highlander but the parking lights do...connection is only good on one out of 3 on both lights...changed bulbs and switched sockets so I know thats not ...
Question about 2001 Highlander
...the bulbs works when park lights are turned on, but they do not light when brakes are applied? I replace the bulbs but they still don't work when brakes are applied. Could be brake light switch ...
...replace as necessary. Check the brake light switch installation: Double-check the installation of the stop light switch to ensure it was installed correctly. If none of these steps resolve the issue, ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
