Questions & Answers for: Chevrolet replace belt

Question about 2008 Equinox

1 Answer

...belt. Most likley your belt has stretched and will need replaced. To replace this belt look for the solid wheel insert a 3/8" ratchet and loosen the belt. Reverse the process to install the new

Ad

Question about 1991 Caprice

1 Answer

...and the belt. It sounds like you had a problem and replaced the wrong component. You chould change whatever component is locked up behind the pulley and replace the belt. Let me know if this

Ad

...replace belt with new belt also check pulley for wear, often times the pulley will cause the squeal even with anew belt if in fact the pulley is worn. look for a very shiny polished pulley signs of a ...

When is the suggested replacement for timing belt on 2001 Chev Impala? Is the timing belt also the serpentine belt? the recommended replacement is usually 60 k however i think that belt can go to ...

Question about 2007 Silverado 2500HD

1 Answer

...belt so you should replace it as a first step unless you have a record of it being replaced in the past 18 months or so. There are some temporary fixes for noisy belts which sometimes work (such as ...

...belt tensioner, if the belt is noisy or seems loose either the belt size is wrong (if it was replaced recently) or the tensioner is defective or one of the belt idler pulleys is defective. ...

Question about 2004 Cavalier

2 Answers

...in the exact configuration as the previous belt to prevent these problems. Always use high quality replacement products to avoid premature drive belt failure. If a multi rib drive belt fails it must ...

REPLACE ALTERNATOR DRIVE BELT. AND ADJUST IT DRIVE BELT TENSION BY TIGHTEN THE UNTIL YOU CAN PRESS DOWN ON THE BELT IN THE LONGEST RUN. YOU NEED TO PRESS DOWN BELT AND GET A 1/4 TO 1/2 INCH DEFLECTION

...replace a belt and the idler pully and its still doing it Check the belt tensioner they squeal when they fail due to constant spring pressure on the pulley> if you replace it I would suggest ...

...replace my belt for my 2006 sonata because I just replace the altenator You must loosen the belt tensioner to replace the belt, do not try and stretch the belt as it will be damaged. The alternator ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...