Questions & Answers for: replace 1998 chevy silverado blower

...Chevy Silverado doesn't blow air on any settings No heat or a/c blows on any settings in my Silverado. I have replaced the resistor, the actual panel that the switch is on, and the blower motor....at ...

...1998 chevy silverado? It stopped working altogether then I replaced a 10 amp fuse and now only medium high and high will work but, switch will not turn back to medium low and off positions. Sounds ...

...Chevy Trucks. The Relay's return spring fails and the relay is held closed by gravity. The only fix is to replace the Resistor Module. I have a 2004 Silverado and have replaced the Module 3 times and ...

heater/airconditioner only works on high? 1998 Chevy Silverado and the heater/airconditioner only works on high? your blower motor resister went bad and needs to be replaced

chevy silverado and my a/c blower motor wont work on #5 position just 1,2,3,4 position . what could be wrong with it,, i took the switch out and it looks good inside it, not burnt or damaged,, CAN YOU

...Chevy Silverado 4wd HD. Blower motor started running all the time even whe the key was removed. I removed the fuse under the hood and the fan stopped. It now works only on speeds 1-4. Is there a high ...

chevy silverado 1500 2wd". Or you can go to ask.com and ask" Where is the resister located on a 2006 Chevy Silverado 1500 2wd". It will give you the info you need. Make sure you check the blower motor

...Chevy 1500 silverado 4x4 blower motor for heater stops working on high and makes noise Sounds like two problems. No high speed could be the blower relay located by the blower motor. The blower motor ...

...Chevy Silverado, My blower motor stopped while driving. I replaced the blower relay, i checked the resistor only to find no burnt connections. I removed the motor and hard wired it and it worked just ...

...1998 Chevy Blazer - I replaced the heater blower motor and resistor pack yesterday. Now the fan works on all speeds except high. Is there a high speed relay? I looked at relay box but dont see ...