Questions & Answers for: Intel how to remove pin

Question about Motherboard

2 Answers

RAM

...remove another 184-pin slot off another board to replace your's. Memory slots are not found just anywhere. Fact, I never heard of anyone trying this. You would be the first! If you do try it & you ...

Ad

...pin remove the jumper from the pin its on and fit over both pins for 20/30 seconds replace jumper back over 1 pin (not lose) and reboot 3) 3 pin remove jumper from the 2 pin it it on and fir over ...

Ad

Question about D850MV Motherboard

1 Answer

...the user guide,but it only went so far as to show the two pin rows [1-8 & 9-16] w\pins 13 & 15 removed.I would really appreciate it if someone could tell me what goes where & in what order.The ...

...is on pins 1 and 2 when you boot the next time. It sounds like they are on pins 2 and 3 now. NOTE: Remove all power before changing the pins. Turn computer off. Remove power cord. Press and hold ...

Question about D945GCCR Motherboard

2 Answers

...pin, then remove it and join center pin to right pin. Now wait for a few seconds and then again remove the jumper and join the center pin to left pin. Make sure to turn the PC off before opening the ...

Question about D102GGC2 Motherboard

1 Answer

...pin jumper by the battery. Lets say that the jumper is on pins 2 and 3. Remove the jumper while the machine is OFF and place onto pins 1 and 2. Power on your machine for a minute. (Note: Your system ...

Question about Motherboard

1 Answer

...all connection without smps powercord when connected 24 pin beep sound coming at the time i will remove four pin no beep sound coming . no disply hello check your ram it might be damaged. ...

Question about DG31PR Motherboard

2 Answers

...pin, then remove it and join center pin to right pin. Now wait for a few seconds and then again remove the jumper and join the center pin to left pin. Make sure to turn the PC off before opening the ...

Question about DG31PR Motherboard

2 Answers

...pin, then remove it and join center pin to right pin. Now wait for a few seconds and then again remove the jumper and join the center pin to left pin. Make sure to turn the PC off before opening the ...

Question about DG31PR Motherboard

2 Answers

...i do Try to reset CMOS (remove the batary , remove the jumper from pin 1-2 and put it in pin 2-3 , wait around 1 min, put the jumper back to pin 1-2, then put back the batary and give it a try

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Intel Computer and Internet Experts

Brad Brown

Level 3 Expert

19187 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...