Questions & Answers for: remove heat shield

Question about 1998 S-10 Pickup

3 Answers

...Heat shield rattles on catalytic converter 98 S10 2.2 can u remove it fairly easily? yes, easy to remove, or put giant radiator hose clamp on it. yes you can remove it or put a couple of tac welds on ...

Ad

Question about 1998 S-10 Pickup

1 Answer

heat shield. Remove the front of the heat shield or, if it is on a hinge, flip it down. 3)Remove the wire leads from the heating element terminals by pulling on the leads. To avoid damaging the wires,

Ad

...remove the wires? The heat shield on the plug wires are there to keep the heat off the wires.I believe they are only on the rear ones.Yes they do come off.They need to be installed on the new ...

Question about 2002 Xterra

1 Answer

...remove it also as the Xterra has a heat shield on the floor board it self. Most exhaust shop if honest will tell you to just remove the rattling shield if there is no exhaust leaks or no Check engine ...

Question about 2005 Explorer

1 Answer

...the frame well hidden behind a heat shield that looks like a brace. the heat shield is held on with 4 bolts, 2 each end, trace lines down when you find shield remove shield and you'll see fuel

Question about 2005 Explorer

1 Answer

shield (if necessary). Remove right inner fender splash shield (if necessary). Disconnect heated oxygen sensor electrical connector. Remove heated oxygen sensor. To Install: Apply anti-seize lubricant

Question about 2002 Rendezvous

1 Answer

...heat shield. 8. Remove the exhaust crossover pipe studs/nuts. 9. Remove the exhaust crossover pipe. INSTALLATION PROCEDURE 1. Install the exhaust crossover pipe. 2. Install the exhaust crossover pipe ...

Question about 2000 Grand Vitara

1 Answer

...Suzuki heat shield The heat shield fell off (rusted). Is it necessary for PA inspection/emissions? I have never had a problem after removing heat shields. Shouldn't make a difference to any

...missing screws to hold it in place.NO bad idea DONT remove heat shield it protects other components from heat damage.heat shields also protect vechicle floor board from getting too hot causing

heat shield is installed, reattach the door to the oven by reversing the process you used to remove it. Plug the oven back in or turn the power back on at the circuit breaker, and test the heat shield

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...