Questions & Answers for: Isuzu Trooper remove

Question about 1987 Trooper

1 Answer

...HOW TO GO ABOUT REMOVING OLD ONE NOTE: This procedure may be easier if the radiator and shroud is removed. If the radiator is not removed, place cardboard in front so not to damage the radiator

Ad

how to remove/instal a heating core on the isuzu trooper? Removal Disconnect the battery ground cable. Drain the engine coolant. Discharge and recover refrigerant (with air conditioning). Remove ...

Ad

Question about 1996 Trooper

1 Answer

how do you remove the heater core in a 1996 Isuzu Trooper STEPS TO REMOVE HEATER CORE IN 1996 ISUZU TROOPER Remove battery cables. You have to remove the upper dash pad on this paticular year model. ...

Question about 1996 Trooper

2 Answers

...will not come out of the axle housing I quote from service manual 1 . Raise and support the truck. Remove the rear wheels, the brake drum or brake caliper and rotor. If this is a disc brake, support ...

on a 2002 isuzu trooper 3.5 V6 with auto and 4wheel drive do i need to remove engine to pull oil pan? i have a loud banging in motor and need to check crankshaft & bearings Yes, you need to pull ...

Question about 1991 Trooper

1 Answer

...then move vehicle forward and rearward approximately three feet. Raise and support vehicle, then remove wheel and tire assemblies. Disconnect brake hose from caliper. Remove caliper locking bolt. ...

Question about 1999 Trooper

1 Answer

...3.5 L Make sure 2- wheel drive is selected. Jack up the vehicle front and support on axle stands. Remove the wheel. Remove the brake caliper. It bolts onto the hub carrier(aka knuckle) with 2 bolts ...

how do i remove the rotor after removing calipar remove centre cap bolts, remove then circlip in centre, remove that section, then look for 3 philips head screws in "holey" lock ring and remove screws

how do you remove oil pan on 1993 Isuzu trooper 4x4 you have to make to unbolt the engine mountings,drain the radiator and remove the upper & lower radiator hoses and get the radiator out just to ...

...MAKCO see the graphic there, click it. http://www.makcotransmissionparts.com/4L30E.html you need to remove the TC, bolts first the bell housings bolts to the engine, those come off, with tranny jack ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...