Questions & Answers for: Fender power failure

failure. To avoid further damage, if you replace the fuse, put a 150 Watt lamp in series with the hot power wire. Make an adapter to do this safely. The lamp will light instead of the fuse blowing and

when i plug it in the power light just flashes green... i get nothing now This is likely a power supply failure. These are a pain to work on during repair due to packaing arrangement.

...is a power supply failure in the amp which is LIKELY a bad filter capacitor. Take in for repair or learn how to work on the eloectronics safely and do the repair yourself. The part is likely under

...is usually also caused by failure in the amplifier. Occasionally a power supply failure causes this problem as well. Due to the way these are packaged, they are a real pain to work on for

...failure in one of the power amps or the power supply. The protect means excess current is being sensed. You need to take in for repair... these are really hard to work on due to the packaging. am ...

...you will need to take it to a shop. Likely there is failure in the power supply or amplifier that has blown the fuse. Replacing the fuse WITHOUT repairing the cause MAY do additional

power cord is seated completely. These are hard to work on and if there is a failure in it, it is unlikely you will get it restored in time. I would suggest renting a system until you get it repaired.

failure of the power switch. It momentarily contacts, charges the power supply caps and then breaks the contact. This is not that uncommon as these switches are not well made and often not designed to

...failure with the Power Amp IC. Fender has a good warranty policy on this stuff - 1 to 3 years If not under warranty you may want to wait until it the problem is more persistent - easier for a tech to ...

Power Light Blinking SO i was playing and the amp just randomly stopped so i flipped the switch off and turned it back on but the only thing that happened was the power light started blinking and no ...