Questions & Answers for: Briggs & Stratton what does pcb stand for

...pcb? You can test the charger right at the battery. With the system just sitting in regular stand-by mode. If you lift the battery leads, they should have about 13.5 volts coming in from the trickle ...

i have a brush master chipper was working but has been standing for 6months now wont work took the plugs off and tried on another machine the plugs sparking.. but doesnt spark on the chipper is it the

I have a John Deere L120 riding mower with a 22 hp Briggs & Stratto v-twin with approx 260 hrs on it. It has been smoking & using around a 1/2 quart of oil for about the last 100 hrs. of ...

Briggs and Stratton Vanguard 23Hp starter issues I have a Briggs and Stratton Vanguard 23 Hp less than 5 years old with less than 500 hours mounted on an old Simplicity 4041. I've had no problems ...

think oil ran in carb had mower tillted to front a while,checked air cleaner and had a lot of oil in it,cleaned , started and ran about 20 min and quit.Did I mess up carb or what did I do to it?Briggs

my 7000 watt stand by gen. did not start when the elec. went out. It can be started both manually and on auto but only runs for about a minute then shuts off. It has propane and the oil is okay. What ...

My generator only puts out 89 volts. I need a model number for your ENGINE not the whole generator. I believe this is a case of the engine not running fast enough. I.e governor adjustment will be ...

ecsess smoke after warm-up If you say it smoke at start up and gets worse...first check your oil in the crank case for gas sometimes the newer engines will get gas leaking into the crankcase when ...