Questions & Answers for: Honda Accord oil pressure switch located 98

...oil pressure switch is leaking. The seal around the Oil pressure switch could have gone bad and now it is leaking. The oil pressure switch is located right above the the oil filter and above the ...

Ad

98 Honda Accord does not show a recall for the ignitor..there is one for the ignition switch.......maybe he got those confused....As for the 83 i was unable to locate any recall records for it :( hope

Ad

...oil pressure switch located exactly above the oil filter adapter. The black plastic housing could have developed a crack and oil will ooze downward and drip off the bottom of the adapter. I had this ...

Question about 1998 Accord

1 Answer

honda accord seats I need to know will 98 honda accord sedan seats fit in my 98 accord coupe yes they will I have swapped out many even some other honda seats will fit like civic and integra!

...malfunction usually cause by a bad vtec solenoid, vtec pressure sensor, low oil level, bad connection. Was oil change done? May want to check the oil level. P1166 is a code for a primary o2 sensor

...oil pressure switch . I check the pressure with a gauge it goes to 50 when i start it the engine is very quiet but that light drive me crazy please help me. Its a honda accord 1993 the oil pressure ...

Question about 1998 Accord

1 Answer

p1259code 98 honda accord ex hesitation p1259 is vtec system fail. check your oil level and condition. will prob need a vtec sol and filter and poss the vtec pressure switch.

...oil from a sensor located on the head is not the oil sensor the location of this sensor is on the left side of the head facing the fire wall If the engine has an overhead cam it could be the cam ...

...oil pressure switch in my engine A lot of times, the oil pressure switch is located somewhere near where the oil filter is. Check all around the manifold that the oil filter screws into for an ...

Question about 1997 Accord

1 Answer

...oil pressure into the intake valve rocker arms, the oil pressure opens the VTEC oil pressure switch so the ECM can verify that VTEC did turn on correctly. 4. The code will set below 4000 RPM if the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1992 Honda Accord
1992 Honda Accord

2,998 Questions

1991 Honda Accord
1991 Honda Accord

2,681 Questions

1995 Honda Accord
1995 Honda Accord

1,631 Questions

1996 Honda Accord
1996 Honda Accord

1,636 Questions

1998 Honda Accord
1998 Honda Accord

1,570 Questions

Manuals & User Guides

Loading...