Questions & Answers for: Yamaha YZF-R6 not shifting

my bike was dropped and now it does not want to shift through the gears smoothly, especially on the way down. Sorry to be the bearer of bad news but this indicates a bent shift fork. You will need an ...

Ad

2005 Yamaha Rhino 660 will not shift out of High to Reverse or Low but runs fine in High where I can run it in 2H 4H and 4HLock. Gear shift handle easily moves to R and L positions but does not ...

Ad

Question about 2003 YZF-R6

1 Answer

...can't find nutral. can anyone help. You have a bent shift fork (or two). The bend in the fork will not move the slider gear properly and causes the lockup. Expensive to fix. The engine gets a ...

...seal and the shift shaft has one also. I am guessing the bad seal is on the shifter shaft. This is not good. This means a lot of pressure was put on the shaft and it is likely the shaft will need to ...

Question about 2006 YZF-R6

1 Answer

...shifting I can not get the bike to go into 3rd and after it goes into 3rd I can't get it into 4th. 1st, 2nd 5th and 6th are easy to shift between. I've tried several times but 3rd and 4th gear will ...

Question about 2000 YZF-R6

1 Answer

...pops in n out of gear more than likely it is internal to the motor, gears and or shift fork is damaged from hard shifting,,,, this is not cheap to repair! motor out of the frame and split to

...not bound up against anything. Do you have to drop the motor for this issue? I am kind of having the same issue with my 05 R6. Mine isnt limp but in order to up shift i have to press the lever down ...

Question about 2002 YZF-R6

1 Answer

...the bottom casing comes off. This allows access to the gears and shift drum / shift forks. I do not recommend this repair for a novice mechanic. Call a Yamaha dealer to confirm my diagnosis and

...manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable

...shifting from 2nd into Neutral and first gear. If anyone knows anything about this please help me thanks. Also in order to get into the springs and what not will I have to drop my engine completely? ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...