20 Most Recent 2000 Yamaha YZF-R6 Questions & Answers


Hi, Tomy for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.visordown.com/forum/club-racing-forum-emra-bemsee-new-era-ng-mro-derby-phoenix/2000-r6-fork-oil-air-gap
2006 7 R6 fork oil and seal change
https://www.manualslib.com/manual/806828/Yamaha-Yzf-R6-L-2000.html
https://www.manualslib.com/manual/806828/Yamaha-Yzf-R6-L-2000.html
https://ownersmanuals2.com/yamaha/yzf-r6-2000-owners-manual-55174

2000 Yamaha... | Answered on May 17, 2019


Hi, Graham the ignition circuit cut-off system comprising of the side stand switch, clutch switch and neutral switch has the following functions:
a. It prevents starting when the transmission is in gear and the side stand is up, but the clutch lever is not pulled.
b. It prevents starting when the transmission is in gear and the clutch lever is pulled, but the side stand is still down.
c. It cuts the running engine when the transmission is in gear and the side stand is moved down.
Periodically check the operation of the ignition circuit cut-off system according to the following tests.
With the engine turned off:
1. Move the side stand down.
2. Make sure that the engine stop switch is set to "RUN"
3. Turn the key to "ON".
4. Shift the transmission into the neutral position.
5. Push the start switch if the engine does not start the neutral switch may be faulty.
With the engine still running:
6. Move the side stand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the side stand down if the engine does not stall you may have a faulty side stand switch.
After the engine has stalled:
10. Move the side stand up.
11. Keep the clutch lever pulled.
12. Push the start switch if the engine does not start you may have a faulty clutch switch.
This check is most reliable if performed with a warmed-up engine.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.r6-forum.com/forums/51-how-tos/99945-disable-sidestand-switch.html
How kickstand switch causes no start situation
https://www.manualslib.com/manual/806828/Yamaha-Yzf-R6-L-2000.html
https://www.partsfish.com/page/oem-parts-for-yamaha
https://ownersmanuals2.com/yamaha/yzf-r6-2000-owners-manual-55174

2000 Yamaha... | Answered on May 12, 2019


Hi, Kevin for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.amazon.com/Motion-Pro-Throttle-Yamaha-YZF-R6/dp/B00230184C
https://www.r6-forum.com/forums/51-how-tos/294249-throttle-cable-help-please.html
https://www.manualslib.com/manual/806828/Yamaha-Yzf-R6-L-2000.html
https://www.partsfish.com/page/oem-parts-for-yamaha
https://ownersmanuals2.com/yamaha/yzf-r6-2000-owners-manual-55174

2000 Yamaha... | Answered on Apr 25, 2019


Hi, Salaheddine before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Engine Run Switch is "FAULTY" or corroded.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand, clutch, neutral safety switch.
10. Security alarm needs a reset.
11. Starter relay, solenoid, starter motor or circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. Faulty ignition relay.
15. The electric starter is working but starter clutch has failed.
16. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.r6-forum.com/forums/57-garage-mechanical-help/162715-will-not-start-good-battery-no-clicking-but-no-turn-over.html
http://www.r6messagenet.com/forums/welcome-center/161248-please-help-bike-wont-start-turn-over.html
Yamaha YZF R6 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha YZFR6A Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2000 Yamaha... | Answered on Feb 14, 2018


Hi, Shiro300zx for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day. 2000 yamaha r6 wire diagram Google Search
Yamaha Motorcycle Wiring Diagrams
Yamaha YZF R6 Service Manual
OEM parts for Yamaha
Yamaha YZF R6 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2000 Yamaha... | Answered on Jun 05, 2017


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.r6messagenet.com/forums/r6-general/99814-battery-charging-jump-starting-bike.html
Okay to jump start with car
Yamaha YZF R6 Service Manual
OEM parts for Yamaha
Yamaha YZF R6 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2000 Yamaha... | Answered on Apr 11, 2017


Hi, Anonymous and the usual suspects are:
1. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Spark plugs in bad condition or partially fouled.
4. Spark plug cables in bad condition and leaking check for spark leakage in the dark
5. Spark plug gap too close or too wide.
6. Faulty ignition coil, module, and or sensor.
7. Loose, dirty, or corroded ignition module connector at crankcase.
8. Faulty CKP or CMP, MAP, ETS, ATS, TPS, O2 sensor.
9. Dirty air filter.
10. Intake air leak.
11. Water, dirt, or rust in the fuel system.
12. Carburetor damaged, contaminated, sticky float, plugged jets.
13. Fuel filter clogged.
14. Old or contaminated fuel.
15. Fuel tank vent system plugged or carb vent line closed off.
16. Gas cap diaphragm valve faulty.
17. Vacuum line from intake manifold to fuel valve is broken, cracked, pinched, or missing.
18. Carburetor controls misadjusted.
19. Incorrect valve timing.
20. Valve springs floating, weak, or broken.
21. Damaged intake or exhaust valve.
22. Incompatible performance parts.
23. The control module may be in "LIMP" mode.
24. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://filestore72.info/download.php?id=0e7b53e0
http://www.r6-forum.com/forums/46-general-discussions/155543-5eb-flat-spot.html
Yamaha YZF R6 Service Manual
OEM parts for Yamaha
Yamaha YZF R6 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2000 Yamaha... | Answered on Feb 22, 2017


Hi, Melvin and the usual suspects are:
1. Inlet system air leak.
2. Enrichener valve not seated or leaking.
3. Damaged or restricted fuel tank vent system.
4. Restricted fuel supply tract.
5. Dirty or damaged air cleaner element.
6. Plugged bowl vent or overflow.
7. Worn or damaged needle or needle jet.
8. Vacuum piston assembly malfunction.
9. Loose or plugged main jets or passages.
10. Improper float level.
11. Accelerator pumps inoperative.
12. Multiple carburetors not in sync.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.r6-forum.com/forums/58-exhaust-fuel-delivery/128277-sputtering-2000-r6.html
Yamaha YZF R6 Service Manual
OEM parts for Yamaha
Yamaha 2001 YZF R6M Owner Manual
Yamaha YZF R6 2000

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2000 Yamaha... | Answered on Feb 22, 2017


Hi, Paul for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r6-forum.com/forums/51-how-tos/125828-replacing-stock-footpegs.html
R6 Footpeg Install
Yamaha YZFR6V Service Manual
OEM parts for Yamaha
Yamaha YZF R6 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2000 Yamaha... | Answered on Nov 20, 2016


Hi, Lukemc for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
R6 neutral light Didn start after attempted theft
http://www.r6messagenet.com/forums/r6-maintenance-technical/47630-speedo-tach-not-working-help.html
1999 2002 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2000 Yamaha... | Answered on Sep 28, 2016


Hi, Xo_kaila for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2000 Yamaha YZF R6 Parts
R6 Air Fuel Filters Oil Change
1999 2002 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2000 Yamaha... | Answered on Sep 28, 2016


Hi, Ak012g9090 you may want to do a compression test for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r6-forum.com/forums/57-garage-mechanical-help/153806-2006-r6-wont-start.html
http://www.r6messagenet.com/forums/r6-maintenance-technical/41873-my-r6-wont-start.html
2003 2004 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2000 Yamaha... | Answered on Sep 28, 2016


Hi, Leergeorgie for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r6-forum.com/forums/46-general-discussions/145047-h1-error-bike-dont-starts.html
http://www.r1-forum.com/forums/4-mechanical-help/132252-gauge-cluster-error-says-hi.html
1999 2002 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2000 Yamaha... | Answered on Sep 28, 2016


Hi, Alexei23 you may have a faulty or contaminated speed sensor for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r6-forum.com/forums/57-garage-mechanical-help/94298-2001-yamaha-r6-speedometer-not-working.html
Speedometer not working sensor
2006 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2000 Yamaha... | Answered on Sep 28, 2016


Hi, Vdubgolf_03 if your headlight is not working, only one beam works, keeps burning out, blinking, or is dim the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chaffed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/lo beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty wiring between battery positive and headlight bulb socket.
9. Weak charging alternator/generator.
10. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
High beam working low beam not working
http://www.r6messagenet.com/forums/r6-maintenance-technical/52203-low-beam-right-side-out.html
1999 2002 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2000 Yamaha... | Answered on Sep 28, 2016


Hi, Ronniebrandt for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r6messagenet.com/forums/r6-maintenance-technical/91863-oil-leak-right-side.html
02 Oil Leak Right Side
1999 2002 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2000 Yamaha... | Answered on Sep 28, 2016


Hi, Genggarage for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Main instrument cluster NOT working
Gauge cluster went out just backlight working
Yamaha YZF R6T Supplementary Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2000 Yamaha... | Answered on Sep 28, 2016


Hi, Indubitably8 for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
How to remove META 357 Imobiliser alarm
http://www.r1-forum.com/forums/4-mechanical-help/166689-removing-datatool-veto-evo.html
1999 2002 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2000 Yamaha... | Answered on Sep 28, 2016


Hi, Ravivikas I am truly sorry about your delivery issue, however, this is a free Q&A site we only answer questions about your motorcycle issues I suggest you contact a Solicitor. Good luck and have a nice day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2000 Yamaha... | Answered on Sep 28, 2016


Hi, Bitnkeat for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r6-forum.com/forums/105-oil-lubrication/91316-topped-off-oil-light-still-not-sensor-problem.html
http://www.r6messagenet.com/forums/r6-maintenance-technical/97848-could-oil-level-sensor.html
1999 2002 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2000 Yamaha... | Answered on Sep 28, 2016

Not finding what you are looking for?
2000 Yamaha YZF-R6 Logo

302 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Yamaha Experts

D. E. Hev

Level 3 Expert

1187 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

vince

Level 3 Expert

1234 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

YZF-R6 Yamaha

  • YZF-R6 Yamaha

Most Popular Question

get r6 engine run installed switch

  • Motorcycles
Loading...