Questions & Answers for: Mercury Mariner does not power on

Question about 2008 Mariner

1 Answer

...power to my factory wiring or harness. Does anyone know the relays and or fuses I may need since I do not have a factory tow package. hello, if the vehicle came with factory towing, i has the relay ...

Ad

...power points not working fuses are all good but still no power to the outlets. Are there any inline fuses? Check with Autozone or similar for fusible links and relays. There are boxes of relays under ...

Ad

Question about 2008 Mariner

1 Answer

...window control switch. The window control switches direct power and ground to the appropriate power window motor. If the other windows work ,it's not a fuse problem . Broken wire's ,master switch

...the power steering does not work. thers somethin the mech didnt reconnect--chec fluid in steerin--probly a vacuum line is at issue--call that joker up and tellum and also ask why he didnt test ...

2006 mercury mariner a/c compressor not working a/c compressor not kicking on. A mechanic would check the level of freon in the system, then for power at the relay and the compressor clutch.

Question about 2006 Mariner

0 Answer

not working is there a fuse? Lights look good Assuming it has automatic, 10A fuse 29 in the smart junction box supplies power to the reverse lamps relay. If the fuse is OK, the relay could have failed

...the clock work or the power port/cig lighter socket...if not then the bat fuse failed too...or maybe just a bad radio. Try to talk to a dealer mechanic for similar problems on the same

...not come on.mmwhat gives? I know it must be power train issue. There is probably a scanner which can diagnose this. It would be more elaborate than the 100-200 dollar units. There is a sensor which ...

not have fact heated seats, so used a fuse tap on the existing fuse for the fact heated seats. The fuse is powered all the time. I tried it on other circuits and they all send power all the time. What

...power and ground from the DLC are provided to the VCM. If the scan tool does not communicate with the VCM: Check the VCM connection to the vehicle. Check the scan tool connection to the VCM. Refer to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...