Questions & Answers for: no brake lights

2003 chevrolet venture no left & right brake light There is only high mount brake light is on ( no left & right brake light on), when I apply the brake. I change the brake light switch (near the brake

...brake lights, or no signal lights I have a 2000 GMC Sierra 2500 and my signal or brake lights don't work...my tail lights work fine i just have no rear blinkers or brake lights, brake lights and turn ...

...brake lights, recently we had issues with the brakes after 1600 bucks trying to fix them they stop just fine but are squishy and feel like there are no brakes. now we also have no brake lights, ...

brake lights dont work have a 2000 jeep grand cherokee and no brake lights. checked fuses bulbs but have no power to the bulb fuse is good Check the brake light switch, it is down on the brake pedal ...

no brake light driving light works touch the brakes and no brake light... checked the fuses and light...ok .. brake relay no idea how to check it... 2006 flhtci There is no brake light relay as far as

...brake lights period the check the stop switch (brake light switch) This is attached to the upper part of the brake pedal itself. Should be a little wire off of it. When that goes bad the brake lights ...

...brake lights i have turn signals and headlights and backing up lights but no center brake lights and no brighter left and no brighter right brake light. again all my lights work except when i hit the ...

...brake lights in my tail light lenses. High-mount tail light brakes work, but no brake lights in both tail light lenses, i know its not the brake switch, because I have the third brake light bulbs. I ...

...brake lights I replaced the brake light switch on my 2002 honda shadow spirit and still no brake lights. Whats the problem? Hi, Carl before diagnosing any brake light issue always check the bulb and ...

...brake lights... which are on a different circuit and you are sure the bulbs are ok check brake light fuse. If fuse ok, unplug brake light switch at brake pedal and cross the terminals with a jumper. ...