Questions & Answers for: Lexmark motor cover

...935 for printhead replace printhead - scanner assembly. The scanner motor is not working correctly. Need to remove side covers, back of printer assembly, the top cover. Printhead is below the top ...

...roller has spring tension on the left side if the pring tension is present you will need to clean the flat leading edges of the mirror motor drive inside of the scanner located under the top

...motor. Turn printer off and removeright cover. Open top cover and override top cover interlock switch. Restart printer and observe main motor and photodeveloper cartridge OPC belt. Does main motor ...

...Cover. Press Select. Motor Detection In Progress? appears. The motor detection process takes about 10 seconds, and stops automatically. Detect Complete. Rebooting? appears, and the printer performs a ...

...cover. on the inside of this box remove the screw located upper right hand corner, remove the screw in the lower right corner, and the screw from the upper left corner. now one more screw on the back ...

...on the carrier motor bearings it is under the case on the R. rear corner. You can reach the front one from inside the cover but the rear you will have to remove cover or fish the straw thru it. ...

...motor cover and check it. 1. Enter Diagnostics mode. 2. Select MOTOR TESTS. 3. Select Drum unit motor. Does the motor rotate normally. Check the dual drive motor assembly for installation. Open the ...

...motor to see if it spins ok if not i am afraid its a new printhead. to get to printhead left and righ covers need removing take screw out of each side of top cover and remove carfully to get left ...

...motor assembly lexmark t632 or printhead I would suggest you contact a certified Lexmark trained technician to replace the printhead or you may contact Lexmark Technical Support. Remove left cover ...

...Quoting from support.lexmark.com above: Problem Error: "936 Main Drive Motor"; Error: "936 Transport Motor"; Error: "937 Main Drive Motor"; Error: "937 Transport Motor" ...