Questions & Answers for: mag light dim

I have replaced batteries and bulb in maglite flashlight. Problem is still the same. The light comes on but immediately dims to very poor light. Can't get at switch ---it's a maglite. Sounds like a ...

...scenario the mag tube has failed it's a costly repair. Can you hear the magnetron operate i.e. light dims, transformer has a louder hum? post back some comments for more help.... Good Luck!! ...

...hear the magnetron operate i.e. light dims,transformer has a louder hum,if so more than likely either the H.v. diode or H.V. capacitor is bad or worst case scenario the mag tube has ...

...light,it is 15 years old but worked great, is it worth fixing????? it is a r-1450 850 watt 1995 sounds like the H.V. diode,capacitor,or mag is shorted first 2 items are cheap, the mag gets pricey, ...

...scenario the mag tube has failed it's a costly repair. Can you hear the magnetron operate i.e. light dims, transformer has a louder hum? post back some comments for more help.... Thanks Good

...Mag 700p. Problem comes and goes, but happens a lot. Power light stays on steady green. I've looked at the boards mounted on the back of the case and everything looks fine--no bulging caps, cold ...

...light was very dim in both so I replaced both bulbs, same faint light with both of the new bulbs. What would be the source of the issue? Dead batteries. A small battery tester will tell you, even ...

...Mag base will not hold at all If I'm not mistaken, these drills use an electromagnet. Start by measuring the current when the magnet is switched on, but not the drill. If you don't have a current ...

...light like the Mag to spot things if you hear a noise in the bushes.x I find this LED flashlight on Amazon, link here Amazon and it's definitely a five star product, and many people said it's bright ...

...2d mag flash light stay dim My 2D mag flash light will not go bright.It stays dim. Check for corrosion at the bulb, or the spring or the switch. This happens sometimes when batteries leak