TIming Consew 210 I replaced the hook on my consew and now the timing is off; topstitch fine, bottom is really loose. I am not sure about this particular machine but in most machines there will be a ...
Thread loosens underneath intermittently. Stitches not consistent. I get loops on the underside of fabric no matter how loose or tight I set the tension. I cleaned the tension discs, replaced the ...
setting up thread bobbins the thread should be clockwise direction as you pull out on slot coming out to the bobbins (as you shown in my inserted image manual).The loop thread should be propely in the
cannot get tension balance correct I have a Consew 199R-1A. I am using Hemingway& Bartlett thread V-92 on 3 or 4 layers of Sunbrella acrylic canvas. I am using a #22 needle. The Consew was purchased ...
...You don't want to see any (or at least notmuch) of the other color showing from the other side. Loops on the bottom of the fabric means you need to tighten(increase) your top tension. If ...
Stitch tension problem - bobbin thread lies flat or bunches. If you increase the needle thread tension there is no improvement - even at the highest needle thread tension the bobbin thread is a mess. ...
I have a problem with the thread tensions on a CP206R walking foot machine. The thread is looped around the one set of tension disks up out of the disk through the spring etc.. However, the thread ...
Usually answered in minutes!
124 Questions
84 Questions
19 Questions
22 Questions
17 Questions