...LED light stable?Few sec.Power LED and LED OPC flashes?This very common on Sharp tv,tries power off/on at 4 or 5 each time it flashes,well power up have backlight on and it work.After this doesn't ...
Question about Aquos LC-42D62U 42 in. LCD HDTV
...LED power light turn on solid first.Few mins,than LED,OPC flahes.Power LED,OPC flashes,push power button again,do this at leat 5 or 6 times somtimes the backlight will come back on and work.The power ...
Question about Aquos LC-42D62U 42 in. LCD HDTV
...LED light indicator stable for a few mins before the power LED light,and the OPC LED light indicators flashes?After the POWER light and OPC light indicators flashes,just push the power button again ...
LED light will flashes require push power again wait again Power and OPC will flashes two or three time push power button and wait.Must do this two or three time before the backlight will light up and
Question about Aquos LC-46D62U 46 in. LCD HDTV
...46" Aquos.The tv Tuner signal board have problems,but this tv still usable.My tv does Power and OPC LEDS lights flashes alots many times as the tv getting older.This how i solved it.If POWER and OPC ...
LED light incation all or power LED light indication an OPC LED lights indication flashing togethers?Tries tv unplug,replug it back like about an hour later,for the tv to do a whole resetting.Tv might
Question about AQUOS LC-C4654U 46" LCD TV
light start to blink and thats about it. How are the power and opc lights blinking? Do they blink simultaneously or does one blink then the other? How many time do they blink per second? Also have you
will not power up If Green or red light is blinking then follow as per attached file.If no any Green light or red light glow then checked power supply board of your led tv.
Question about AQUOS LC-32D44U 32 in. LCD TV
light no sound no lights.do have 5 volts coming out of board Remove Mains Plug and press Standby switch from LED Panel for 30 sec. Press Input & Ch Down Switch from LED panel and plug in and start
Question about AQUOS LC-32D44U 32 in. LCD TV
light Remove Mains Plug and press Standby switch from LED Panel for 30 sec. Press Input & Ch Down Switch from LED panel and plug in and start LED LED will start and "K" will appear on screen Press
Usually answered in minutes!
878 Questions
339 Questions
295 Questions
241 Questions
202 Questions