Question about (200NSH-LAMP) Projector Lamp for PB6100, PB620
LED lights coming on but the rest of the buttons has light. Tried every other component from the lamp to the colourwheel , but the Mainboard replacement fixed it in the end. You'll be looking at about
...led (lamp) is flashing. I try also replacing the lamp. Is there some type of reset procedure for this projector ? if the lamp comes on, hold the exit button down until the osd comes on. press enter, ...
...lamp LED indicator lights up red. After cool-down and shut-off, lamp LED indicator lights up red. After setting on the shelf for 6 months, did get lamp to light: held EXIT down for 3 seconds and it ...
Question about W1000 Home Entertainment Projector Projector
...lamp error led comes on It was ok before this cleaning I think i may need to somehow reset the unit Any suggestions? thx -len please tell me what the POWER, TEMP and LAMP leds are displaying when it ...
...lamp has run 2001 hours and should be replaced. After this window disappears, it takes maybe 2 seconds and the projector shuts down with the red TEMP LED switched on and all other LEDs off... I have ...
lamp doesn't turn on I push the startbutton, then the green upstart led flashed (that's normal) but then the beamerbulb doesn't start. After 30 seconds, the little ...
...LED lamp will be lit and after the usual "cooling" the projector switches off in the usual way. What could be the problem and can I possibly fix this myself? Thanks in advance, greetings from Paul ...
...lamp led flashes red 3 times, a pause on the red, then 3 more times, then a pause on red etc etc. Before changing lamp use a canister of compressed air to remove dust specially inside the projector ...
Question about PE7800 Multimedia Projector
...lamp goes out, no light on LED indicators, not powering up anymore Projector : BENQ mp610 when turn on lamp lights on and then when fan starts running , lamp goes out, no light on all LED indicators, ...
Question about PE7800 Multimedia Projector
...then shut down and swap, eventually it worked, it was a pain. in the end I bought an led projector for the price of a new lamp for the old one the lamp is ok it seems that the lamp ballast is ...
Usually answered in minutes!
230 Questions
141 Questions
104 Questions
82 Questions
96 Questions