Questions & Answers for: Brother HL label the parts

...come to green, press go button 5times supersuper fast, test print should print shortly. If printing labels, card, transparencys or have setting as this paper type machine will default to manual pass ...

Easy peel Labels stuck to rollers cant print When printing labels with easy peel labels two labels stuck in the rollers how do I retrieve the lables On which roller are these labels stuck? On the drum

Brother HL-2070N red "paper" light flashes after a paper jam After pulling out a paper jam the "paper" light on my Brother HL-2070N began flashing. I opened all the accesses and found no more paper. I

...label removing these parts/opening the covers, the machine would require to be screwed apart to reach it. There is no levels to release pressure on drum or similar to reach further within, ...

...label on the drum unit. Fold the toner cartridgehandles down once the cartridges are in place. 1. C- Cyan, 2. M- Magenta, 3. Y- Yellow, 4. K- Black Hold the green parts of the belt unit with both ...

...parts inside the machine are extremely hot. 1. If the paper source setting of the program you are printing from or the Brother printer driver is set to Manual feed, the Paper LED will flash prompting ...

...The message "Print Unable 32" or "Machine Error 32" will appear on the LCD display if paper or labels are stuck inside the printer or drum unit. [This page gives instructions on how to remove

parts shown in the illustrations. Push to release thelatches of the white corona wire cover (1), and then open the cover. Clean the corona wireinside the drum unit by gently sliding the green tab from

...if you refill the toner cartridge with the toners available in the market,though they are labelled"for Brother 2140" you get vertical dark patches on the paper. Once in a while you get good ...

how do i remove the drum? Open the front hatch, grab a good hold on the assembly inside. Lift up and pull towards you firmly. The drum and toner assembly will slide out together. Separate the toner ...