Questions & Answers for: Mach Speed jumper

...card, 400 watt supply and a creative sound card (Audigy). Please Help! Tony look for the reset jumper on the board and then reset it then try again Try to solve th eproblem by process of ...

hdd problem I BOUGHT THIS MSNV-939 MOBO W/AMD X2 3800,I REFORMATED MY MAIN DRIVE IN CABLE SELECT, NOW WHEN I PUT THIS SECOND DRIVE IN TO RUN AS A MASTER & SLAVE (CHANGING JUMPERS OF COURSE) ON BOOT IT

No boot on start up all fans start but no video Hello I just put together a new system with all new components from the ground up. mach speed motherboard,AMD 64 X2 3800+ socket 939 cpu.one stick ...

Viper MSNV-939 ATX Socket 939 audio connector jumper settings i disconnected the front side audio and would like to connect the back pannel audio connecter. what is the factory jumper setting for the ...

1.8g cpu 266 FSB Question: will this memory 333MHZ/266FSB work together.....do I have to change any jumper on M/B Here is the information you will need. http://www.shopping.com/xPF-MACH-SPEED-MB-VENOM

...settings. The fastest way to get the bios to load the onboard graphics would be to clear the cmos jumper. This is shown on page 12. JCMOS1: Clear CMOS Header. Do not forget to set the jumper back

...SATA drives. On the motherboard, near the motherboard battery look for a small coloured plastic jumper. If your motherboard has one it will be marked as CLR_CMOS. Just move the jumper to the

...in the slots and not as secure as it would seem they should fit. two questions.. 1. Is there a jumper on this mb to switch from 333 to a 400 speed that I have to set? 2. Is the wintex memory

jumper bios 3 how do i enable lan to enable lan you will have to go through the bios when you start tape f8 or f11 or esc to get into your system setting