Questions & Answers for: jeep wrangler loose ignition

jeep wrangler got home this morning and none of my guages are working and there is no power going to the radio checked all the fuses but there all fine any ideas 1) Check large fuses and relays in the

...jeep wrangler start when I turn the key, but will start if I roll it. I replaced the starter and the silinoid....help.... The Starter relay is bad. check both fuel pump relay and if it has ignition ...

jeep and it just quits. headlights work, but nothing else. there is no power to the ignition switch. Sounds like the positve cable on the starter or the fuse link is loose or going bad. Check for good

...jeep stutters when it goes over bumps, and sometimes it even stalls for what seems like no reason at all... what's wrong with it? Check that all of the fuses and relays are pushed in tight. Check the ...

1992 wrangler starts and idles fine but backfires and looses power under load. Your ignition timing is off.

...jeep wrangler. the accessory connector that plugs into the ignition switch gets hot , looses contact and the blower motor and other accessories go dead. i believe i may have a short. the offending ...

jeep wrangler shows p0305, p0306. I know this means cylinder miss fire, but what would cause this. How many miles are on the car? Are the wires and plugs old? typically spark plugs, ignition coils are

Jeep 2007 Wrangler Unlimited X 4x4 4 Doors Jeep 2007 Wrangler Unlimited X 4 Doors. When I went to start it one morning, it made a clicking sound when turning the key to start and the wipers went on, ...

...jeep wrangler. On warm days the click happens quickly and on cold days, I have to wait 30 minutes to hear the click. Once it clicks, it starts right up. Is it the ignition, fuel pump or relay? Help ...

...Jeep TJ, the wipers, radio and turn signals all stopped working. Checked fuses, nothing seems blown. Also, they all work when the ignition switch is in the accessories position, but when you turn the ...