Questions & Answers for: how to install fascia

...the horizontal flange with the fender drive pin. Push fascia rearward to engage the fasteners. Install nut on fascia stud through the splash shield access hole. Verify headlamp operation and ...

Ad

...fascia. Install the 5 push-pins on top of the fascia grille. Install the front splash shield on the front bumper fascia with the 8 screws. Install the left and right front inner fenders. Connect the ...

Ad

fascia by pulling the lamp forward. To Install: Place the cornering lamp rearward retaining stem into the slot in the fascia. Engage the cornering lamp forward retaining tab into the fascia by pushing

...the horizontal flange with the fender drive pin. Push fascia rearward to engage the fasteners. Install nut on fascia stud through the splash shield access hole. Verify headlamp operation and ...

Question about 2003 Vibe

1 Answer

...fascia. Install the headlamp bulb to the composite headlamp, if removed. Fasten the headlamp bulb retainer clip. Install the socket to the headlamp bulb. Install the rubber cover to the composite ...

Question about 2006 SRX

1 Answer

...fascia and grille assembly forward only far enough to install the bolt located at the bottom inboard side of the headlamp assembly.NOTE: Refer to Fastener Notice in Service Precautions. Install the ...

Question about 2006 SRX

1 Answer

Install the two bolts attaching fascia to headlamp mounting panel at each side of grille. Hoist vehicle and support with safety stands. Install the two bolts and two nuts attaching fascia to the front

...Install the two bolts attaching fascia to headlamp mounting panel at each side of grille.Hoist vehicle and support with safety stands.Install the two bolts and two nuts attaching fascia to the front ...

...and pull outward from the fascia while releasing the locking tabs. Remove molding from fascia.INSTALLATION Place bright chrome molding in position on the upper fascia. Here you ...

...Install nuts holding fascia wings to fender. Install inner wheelhouse. Install push-in fasteners holding fascia to underside of bumper reinforcement. Install screws holding top of grille to headlamp ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...