...incline motor is working but the deck does not incline or move. The incline display on the console works with up/down arrows but the deck does not move, although the incline motor makes a noise like ...
Question about 650 Crosstrainer Treadmill
incline motor outside the treadmill. Many times, this will unjam it if that is the problem and then reinstalling it in the treadmill will get it to work. If you have the same problem or it doesn?t run
Question about XP 580 Crosstrainer Treadmill Incline Motor
Incline motor ran away, won't work after replacing While running, the incline motor went berserk and ran up to the top of its travel without stopping, actually pressing against the top housing, ...
Question about XP 580 Crosstrainer Treadmill Incline Motor
...incline motor operates, and the display board CPU uses the VR voltage to calculate the incline position. Without this value, the CPU cannot instruct the incline motor what to do, so ERR? appears. Or ...
...incline motor operates, and the display board CPU uses the VR voltage to calculate the incline position. Without this value, the CPU cannot instruct the incline motor what to do, so ERR? appears. Or ...
Question about Nordictrack Apex 5100 Treadmill Motor Control Board
...incline motor stopped working on Nordic tracap apex5100 How do I replace incline motor? The incline motor stopped working- have new motor but need instructions. thanks! unplug unit and remove the ...
Question about 415 CT - Treadmills
...incline motor runs for 3 to5 seconds proform415ct Incline motor runs a few seconds then shuts off incline does not move everything else works if the motor tries to work but incline does not go up ...
Question about 415 CT - Treadmills
...incline motor VR wire not on right position. 1.rework the VR cable head to be sure on right position. 2.incline motor AC wire not on right position 2.incline motor AC wire insert again to be sure ...
Question about 415 CT - Treadmills
...incline motor. The incline motor is responsible for adjusting the incline of the elliptical, and when it is not working properly, the elliptical will display this error message. Here are some steps ...
...incline motor or the lifting mechanism. Here are a few troubleshooting steps you can take: Check for any visible damage or obstructions in the incline mechanism. Make sure that there is nothing ...
Usually answered in minutes!
2,517 Questions
1,056 Questions
713 Questions
416 Questions
354 Questions