Questions & Answers for: Chrysler New Yorker ignition switch wiring

...relay wires are secured, battery cables secured, alternator is able to charge battery...can you jump start it? Also verify ignition switch is in good working order..this can cause your ...

...switch,tested starter still nothing. if it will not crank have you checked all your fuses and relays? there should be a crank fuse and a starter relay. is the relay functioning propperly. next check ...

Ignition Switch Harness Starter Positive Wire (+): Yellow Starter Positive Wire Location: Ignition Switch Harness Ignition Positive Wire (+): Dark Blue Ignition Positive Wire Location: Ignition Switch

we checked the wiring on the ignition switch mounted under the steering column it was loose. Repositioned it and everything worked perfectly again. Did not cost a thing. Hope this helps

...ignition when key turns nothings is working, no start.. there is a big red wire that also connects to the battery along with the main hot wire and there is a plug on it [big round white or black ...

...on your ignition switch(the electrical part ) see if anything open and wiggle around that area and see if the gauge goes on. and what color wire did you take power from including ground.let me ...

...ignition switch. When I bout the car it would idle extremely rough, and had problems accelerating. I changed the plugs and wires, made sure they where gaped properly. I know one of the codes is for ...

...ignition coil, new fuel pump, filter, cleaned tank" did not reuse fuel". All fluids checked, fresh oil change, air filter. Forgetting all you have done & why What is or was the main issue & ...

...switch, among other things. Have you tried cranking it in neutral ? Do you have power at the starter post ? Does everything else work when you turn the key on ? which engine do you have? your starter ...

how to hotwire the ignition switch ignition switch broke just need to know what wires to put together to start it Here's a link to your problem. How to Hotwire Car