20 Most Recent
1994 Chrysler New Yorker Questions & Answers
How to remove instrument cluster
Get one of these,,, it will answer all your questions
http://www.rockauto.com/en/catalog/chrysler,1992,new+yorker,3.8l+v6,1066047,literature,repair+manual,10335
94 New Yorker, replaces fuel pump and fuel filter and....
It's either not getting fuel or spark. Have you checked to see if you are getting any spark to the plugs. Take one of the plug wires off its plug and place it close to the frame or engine. When you crank the engine you should be able to see a spark jump from the plug wire to the frame. if you do not see a spark you have a problem with the ignition system. If you do see a spark then the problem is with the fuel system.
Hope this helps Good luck Loringh
Why does my heater motor stays on controls don't work 94 chrysler?
sounds like you have a blower motor resistor that has gone bad. these systems are set up(wired) that the blower will either not work, caused by the main resistor wire is broken, or will only run on high. you don`t say exactly what is your problem. it could also be a bad switch that has gone bad and won`t shut off(always in the run position) due to a short.
Reset ac heater
try to unplug the resistor blower fan resistor. if fan shut off replace the resistor bank/
Not finding what you are looking for?