Questions & Answers for: honda accord trunk light replacement

...light that indicates that the trunk is opened lights up constantly. Also when the trunk is closed. What may be the problem? A bad switch back their at detects when the trunk is open. If you replace ...

Honda accord and the back lights or dash light don't not work we check the fuse and the lights but still nothing i think it is the wiring is there anyway you can help I had the exact same problem with

...Honda accord whenever it rains My 1990 Honda Accord does this too. When I wash it or when it rains. If I open the trunk/deck lid water flows out of the right rear tail light housing into the trunk. ...

honda accord. The third light. If you will look in the trunk under that light you will see 2 holes on each side of the light. Inside those holes are the screws holding the light in place. Remove those

the license plate and back up bulbs on a '92 Honda Accord Ex? The license plate lights are accessed by unscrewing the lens. The backup lightbulbs are accessed with the trunk lid open, behind the cover

...honda accord lx? Inside the trunk you will have to pull back the carpet and a the carpet material behind the tail light assembly should have nuts 2-4. once these are removed the assembly can be ...

...Honda cars. To check, hose down the trunk area and tail lights, then look at the gaskets from inside the trunk. You'll probably will see some water. To fix, you need to take each tail light out and ...

...Honda Accord trunk light will not turn off. It has drained the battery a few times. How can I fix this? find the switch for the light and just tape it closed(switch position when light is off), ...

...honda accord 1996 Will have to replace the bulb. This is done from inside the trunk. Remove carpeted cover and there are twist type sockets in the housing which hold the bulbs. For the dash, you will ...

Honda Accord so I can replace it with the new assembly ? How do I remove the broken tail light assembly on the drivers side of my 2012 Honda Accord so I can replace it with the new assembly ? Have you