Questions & Answers for: Volkswagen Passat hold button

...hold the 0.0 button on the cluster. With your other hand turn the key to the on position , while still holding 0.0 button, press the minute button for 1 second and you will see the service reset. ...

...to the original position) Any hel.. greatly apreciated.. .. thanks If there is an "M" button you have to hold down the "M" button with # 1 together at the same time, and the same for the other

...Hold the right trip button. While holding the button Turn ignition on. The display read service, While still holding the trip button turn the left clock adjustment arm to the right or if you were ...

...hold the wrench button down. While still holding the wrench button turn on the ignition all the way, but do not start the car. Release the wrench button and press and hold the minutes (min) for a few ...

hold the wrench button. Count 5 seconds, start the car while still pushing the wrench button and then push the min button on your clock. You must be holding the wrench button and the min button at the

hold the MODE and SCAN button together until SAFE changes to 1000. Release the buttons and using the first four station buttons enter the radio code. Use button #1 to change the 1 to the correct code,

...hold lock button on keypad.making sure that in both cases you know the keyfob battery is in good nick....should reset system It sound like an actuator issue. The power door lock motor failed in that ...

...light resets. PRESS AND HOLD TRIP BUTTON LEFT OF SPEEDO Switch ignition on Service will appear in trip display Release trip button Turn button near rev counter to the right to reset Switch ignition ...

my remote control for volkswagen can not open the door prees and hold the lock button for 30secs then press and hold the unlock button.OR see my VW reset procedure either one should work.

...hold in handbrake button for 10 seconds, release all and start car up, press break button a few times, turn car off again take out key, lock and open car then press break button again and now all ...