Questions & Answers for: hold button Cars & Trucks

Question about 2005 Pilot

3 Answers

Hold the button for approximately ten seconds until the indicator resets 1- turn off the engine. 2- press and hold the select/Reset button on the instrument panel, then turn on the ignition switch ON

Ad

Question about 2006 Passat

3 Answers

...hold the 0.0 button on the cluster. With your other hand turn the key to the on position , while still holding 0.0 button, press the minute button for 1 second and you will see the service reset. ...

Ad

...hold the button for 2 seconds until "RESET FOR SYSTEM CHECK" is displayed, then release. 3.) Imediately press and hold button for 2 more seconds until "Oil 100% RESET IF NEW" is displayed, then ...

on" while still holding in the odometer reset button 4. Hold in the odometer reset button until all of the warning lights have lit - after about 10 seconds the "maintenance required" light will go off

Question about 2008 F 250 Super Duty 4WD

2 Answers

...hold reset button for 2 sec. and release oil life should read 100% #4 center displays"setup menu hold reset" base cluster #1 press and release trip/reset button until mess. cntr. displays"setup menu ...

...hold button until you see SYSTEM CHECK or SYSTEM CHECK HOLD SET is displayed then release button. 3)press and release button to scroll the menu until you see HOLD RESET IF NEW OIL . 4) with hold rest ...

Question about 2006 5 Series

1 Answer

...hold the button on the left of the instrument cluster. an orange triangle will appear keep holding button in. next the cbs service data will appear release button. by pushing button briefly without ...

Question about 2006 Explorer

1 Answer

...hold the button for 2 seconds until "RESET FOR SYSTEM CHECK" is displayed, then release. 3.) Immediately press and hold button for 2 more seconds until "Oil 100% RESET IF NEW" is displayed, then ...

Question about 1993 MX-6

1 Answer

...hold button for? There is a hold button on the gear shifter don't know what it does. The hold light keeps flashing but the button is not pushed in. When working properly the hold button when pressed ...

...hold button on 1999 Kia Sporyage Hold button was accidently turned on and cannon turn it off It should turn off after you restart your car. If not press the hold button again +1 Tammy Moore I also ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...