Questions & Answers for: Chevrolet Chevy where are the heads on a engine

Question about 1984 Chevy

1 Answer

...heads and intake off the '84 to the vortec V6? The 2.8 is a 60 degree engine, and the 4.3 a 90 degree engine. Meaning the bank of the cylinders in relation to the center line of the engine. If you ...

Ad

replaced to repair the problem, and that can be very costly. Always check the intake gasket first on V6, V8 and V10 engines. Then the cylinder head gaskets, cylinder heads and finally the engine block

Ad

whats the torque for the head bolts for a 1987 chvey s10 It depends on what engine you have....if its a 4 cyl.2.5L start from the centre and work your way out in a clockwise position...first torque ...

...Heads Engine oil (blind hole) Sealer (water jacket) 65 ft-lbs. Rocker Studs (screw-in) Engine Oil 50 ft-lbs. Oil Pump Engine Oil 65 ft-lbs. Oil Pan Engine Oil 12 ft-lbs. Cam Sprocket (upper gear) ...

Cooolant level down no leakage from engine Temp gage reading high when driving after 5 mins. Coolant level low but no visible leaking. Dealershop stated found smaill leak at base of water pump,(red ...

Question about 1983 Chevy

1 Answer

i have a 1998 chevy mini van, and the anti-freeze is leaking into the engine oil causeing my car to over heat. what does this sound like? This sounds like a head gasket. For a quick cheap fix you ...

Question about 1983 Chevy

1 Answer

heads torque spec for a 97 chevy malibu 3.1 engine Please refer to the following "GM Tech Solutions Guide" on the Head bolt torque procedure for the 3.1 and the 3.4 V6 engines, Follow the link please.

Question about 1983 Chevy

3 Answers

i have a 2000 2.2 chevy cavalier that i buy today and it have oil in the reservoir bottle what can it be plz help If it has oil in the coolant resivoir bottle it has most likely got a blown head ...

Question about 1985 Chevy

1 Answer

water in oil no water coming out of engine Water in the oil is most likely a head gasket leak-blown head gasket.  You will have to pull the cylinder head off and replace the head gasket.  If

Question about 1985 Chevy

1 Answer

...heads checked for cracks, then see what happens. Or have the engine dismantled to check the bearings and rings. If your engine is not worth fixing, you could buy a used engine cheaper than buying a ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...