Questions & Answers for: where are the heads on a engine

...Engine was overheated previous to this problem. you have either cracked the block cracked the heads or taken out the headgaskets. this can be an expensive fix to do it right you will need to rebuild ...

...engine?Altima and Sentra To install: Clean the gasket surfaces. Using new head gaskets, install the cylinder heads. NOTE If possible, replacement of the head bolts is suggested. If replacement of the ...

...engine-Altima and Sentra To install: Clean the gasket surfaces. Using new head gaskets, install the cylinder heads. NOTE If possible, replacement of the head bolts is suggested. If replacement of the ...

heads on a GMC 350 cu in engine.  what is the final torque of the head bolts? For 1985 Chevrolet Camaro 5.0L 4BL OHV 8cyl the Head Bolt Torque 60-70 Foot pounds (Final torque) Torque sequence ---

HEADS THIS WILL KEEP ENGINE RUNNING.THE ONLY THING YOU CAN DO POUR A FUEL INJECTOR CLEANER AND ENGINE CARBON REMOVER IN GAS TANK.A BOTTLE OF SEAFOAM WILL DO. SECOND OPTION IF ENGINE KEEP DIESELING.YOU

...engine. There are no two heads alike as far as different engines go. Your 800cc engine is a 3 cylinder engine. Other sizes will not fit as they are 4 cylinder engines. Even with the 800cc engine you ...

...engine so it has 2 heads and 2 head gaskets, one on each side of the engine. It is a very expensive job to replace head gaskets. the head gasket is always the gasket between the head (cylinder) and ...

Had minor MVA radiator lost all fluid... No visual damage to car but engine cranks but wouldn't start instantly.... What could cause this? If you have an alloy engine head and the engine got real hot ...

...their specs. Click Here! 3/8 Connecting Rod Bolt, Engine Oil, 45 ft-lbs. 11/32 Connecting Rod Bolt, Engine Oil, 35 ft-lbs. Cylinder Heads. Engine oil. (blind hole).

Water in the oil Radiator coolant in the engine oil is normally an indication of a failed cylinder head gasket or a crack in the cylinder head or both. Running the engine in an overheated condition ...