Questions & Answers for: fuel pipes

fuel pipes in order to avoid possible contamination of the fuel system. Disconnect the fuel return pipe (2) at the rear quick-connect fitting. Disconnect the evaporative emission (EVAP) purge pipe (1)

fuel return pipes at the fuel sender. NOTE Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement

how do i chage the fuel injector for a geo metro 1997 LSI? REMOVAL & INSTALLATION Fig. 1: Removing injectors from fuel rail Fig. 2: Make sure injectors rotate freely in cylinder head Relieve fuel ...

...fuel pipes. Use a jack to support the fuel tank. Fuel tank removal and installation Detach the fuel tank straps from the frame. Lower the fuel tank. Disconnect the fuel sender connector. Remove the ...

...test will open diaphram in tap fuel should flow from other two pipes if any fuel comes through vacuum pipe diaphram is gone replacement parts availible for this on major auction site and ...

...fuel filler pipes, so you cannot put a pipe in there to extract any fuel. Depending on the design and location of the fuel pump, you may be able to **** fuel out of the fuel feed pipe to the engine. ...

...is the return pipe. Blow compressed air thru it and watch the pipes at the fuel pump end. Watch out for fuel sprays and protect yourself. You will be able to know which one is the return

fuel pipes. Refer to Quick Connect Fitting(s) Service (Plastic Collar) . 6. Remove the EVAP canister bracket nut. 7. Loosen the fuel tank fill pipe hose clamp. 8. Disconnect the fuel tank fill pipe (2

...Pipes The fuel feed pipe carries fuel from the fuel tank to the fuel rail assembly. The fuel return pipe carries fuel from the fuel rail assembly back to the fuel tank. The fuel pipes consist of 2 ...

Where is the trap door for a 2001 pontiac aztek fuel pump trap door There is no trap door , you have to take the fuel tank out of the vehicle ! Removal Procedure Important: Always maintain cleanliness