Questions & Answers for: ford escape 2002 power steering

...ford escape Take a picture of it before you take it apart so you know where everything goes. 1.Take belt off 2. Unbolt any bracket that the power steering pump is bolted too.( only if you have to ...

Ad

...4wd Ford Escape is quite noisy when making turns. Power steering fluid is full and it is getting a bit hard to turn... power steering unit needs to be replaced. the booster is not working good.

Ad

does low power steering fluid affect the braking system it definately should not affect the braking system, they are totally separate systems and do not use the same fluid.

...Ford Escape XLT OD light blinking - am told it may be a torque converter cellunoid - only has 80K on it & I bought it new! Any ideas? How expensive is the fix? Would it help to change the ...

Question about 2002 Escape

1 Answer

...ford escape stiff steering when car is at stop or moving less then 2-3 mph.what could be the causes and where would i go in boston to find the most inexpensive parts? thanks i would have the rack and ...

Question about 2002 Escape

1 Answer

...power steering fluid. hi. best thing to is pressure wash the pump, pipes and steering rack to work out where the leak is coming from. most of the parts are not servicable so it is just a matter of ...

Ford Escape (my daughter just came home from school) sitting in driveway and all of the power steering fluid has leaked onto the drive. I refilled and it all leaked out again. I don't know why you

...ford escape myself? New to DIY - but found changing power steering and coolant simple, although a bit time consuming (via siphon method). It's been harder to find videos on changing the break ...

...ford escape and i dont know much about cars/trucks. My truck i wining:( .I think it may need antifreeze. I only see one place to put it... in the reserve?? I just had an oil change and don't ...

...on a 2002 ford escape v6-3.0..found it/fixed it..thanks for the info.now I got power steering fluid leaking ..any advice Its usually the high pressure line that goes bad ! Replace it ! Try you tube

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...